143
Network Camera User Manual
Figure 10-35 Heat Map Configuration
2.
Check
Enable Heat Map
checkbox to enable the function.
3.
Go to
Area Settings
to draw detection area. Draw area by left click the
end-points in the live view window, and right click to finish the area drawing. Up to 8
areas are configurable.
Note:
You can click
Select All
to select the whole live view window as the
configured area. Or click
Delete
to delete the current drawn area.
4.
Configure the parameters for drawn area.
Detection Sensitivity
[0~100]: It refers to the sensitivity of the camera identify a
target. The over-high sensitivity may cause the misinformation. It is recommended
you set the sensitivity as the default value, which is 50.
Background Update Rate
[0~100]: It refers to the speed of the new scene
replaces the previous scene. E.g.: In front of a cabinet, the people besides the
cabinet will be double counted if the goods moved from the cabinet, and the
