155
Network Camera User Manual
2.
View the memory card status on
Status Detection
tab.
Remaining Lifespan:
It shows the percentage of the remaining lifespan. The lifespan of
a memory card may be influenced by factors such as its capacity and the bitrate. You
need to change the memory card if the remaining lifespan is not enough.
Health Status:
It shows the condition of your memory card. There are thrree status
descriptions, good, bad, and damaged. You will receive a notification if the health status
is anything other than good when the
Arming Schedule
and
Linkage Method
are set.
Note:
It is recommended that you change the memory card when the health status is not
“good”.
3.
Click
R/W Lock
tab to add a lock to the memory card.
With the R/W lock added, the memory card can only be read and write when it is
unlocked.
Figure 11-11 R/W Lock Setting
Add a Lock
(1)
Select the
Lock Switch
as ON.
(2)
Input the password.
(3)
Click
Save
to save the settings.
Unlock
(1)
If you use the memory card on the camera that locks it, unlocking will be done
automatically and no unlocking procedures are required on the part of users.
(2)
If you use the memory card (with a lock) on a different camera, you can go to
