![background image](http://html.mh-extra.com/html/hyundai/nextgen/nextgen_user-manual_2197313069.webp)
68
Network Camera User Manual
7.2
Configure Advanced Settings
Purpose:
You can configure the parameters, including SNMP, FTP, Email, HTTPS, QoS, 802.1x, etc.,
by following the instructions in this section.
7.2.1
Configuring SNMP Settings
Purpose:
You can set the SNMP function to get camera status, parameters and alarm related
information, and manage the camera remotely when it is connected to the network.
Before you start:
Before setting the SNMP, please download the SNMP software and manage to receive the
camera information via SNMP port. By setting the Trap Address, the camera can send the
alarm event and exception messages to the surveillance center.
Note:
The SNMP version you select should be the same as that of the SNMP software. And
you also need to use the different version according to the security level you required. SNMP
v1 provides no security and SNMP v2 requires password for access. And SNMP v3 provides
encryption and if you use the third version, HTTPS protocol must be enabled.
For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower case letters,
numbers and special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility
of the installer and/or end-user.
Steps: