![background image](http://html.mh-extra.com/html/hyundai/nextgen/nextgen_user-manual_2197313088.webp)
87
Network Camera User Manual
(3)
Click
Drawing
. Click and drag the mouse on the view screen to draw a red rectangle
as the ROI region. You can click
Clear
to cancel former drawing. Click
Stop
Drawing
when you finish.
(4)
Select the ROI level.
(5)
Enter a region name for the chosen region.
(6)
Click
Save
the save the settings of ROI settings for chosen fixed region.
(7)
Repeat steps (1) to (6) to setup other fixed regions.
5.
Set
Dynamic Region
for ROI.
(1)
Check the checkbox to enable
Face Tracking
.
Note:
To enable face tracking function, the face detection function should be supported
and enabled.
(2)
Select the ROI level.
6.
Click
Save
to save the settings.
Note:
ROI level means the image quality enhancing level. The larger the value is, the better
the image quality would be.
8.4
Display Info. on Stream
Check the checkbox of
Enable Dual-VCA
, and the information of the objects (e.g. human,
vehicle, etc.) will be marked in the video stream. Then, you can set rules on the connected
rear-end device to detect the events including line crossing, intrusion, etc.
Figure 8-4 Display Info. on Stream