1
1.0 Introduction
2
2.0 Terminology
2
3.0 Track Wiring for Detection with BDL16
4
4.0 BDL16 Installation
4
5.0 Set up for Non-Digitrax layouts
8
6.0 Customizing Your BDL16 By Setting Up Option Switches
10
6.1 How to read back and change BDL16 Option Switches:
10
7.0 Power Management
11
8.0 Auto-Reversing
13
9.0 LED Occupancy Indicators
13
10.0 BDL16 Board Address
14
10.1 To set up the board address
14
11.0 Troubleshooting: Checklist
14
11.1 Packet Reception
14
11.2 Mode Indication
15
11.3 Occupancy Debug
15
11.4 LocoNet Debug
15
11.5 Analog Locomotives
15
12.0 Warranty and Repair Information
16
13.0 FCC Information
16
BDL16 LocoNet Occupancy Detector
with RX4 Installation Information
Manual
Digitrax, LocoNet, Genesis II, Empire Builder II, Chief II, Super Chief, and
others included in this manual are trademarks of various manufacturers includ-
ing Digitrax and others. There are many different manufacturers who build
products that work with Digitrax, those used in this manual are for example
only. U.S. & International Patents Pending for BDL16, RX4, transponding and
other Digitrax products & technologies
Copyright Digitrax, Inc. All rights reserved. Printed in USA. REV 02/01
