![background image](http://html.mh-extra.com/html/hyundai/n5000/n5000_instruction-manual_2196570041.webp)
38
Chapter
Chapter
Chapter
Chapter4
4
4
4.
.
.
. Inverter Operation
Inverter Operation
Inverter Operation
Inverter Operation
N5000 INSTRUCTION MAN
N5000 INSTRUCTION MAN
N5000 INSTRUCTION MAN
N5000 INSTRUCTION MANUAL
UAL
UAL
UAL
4.3.8 Function Selecting Menu
Function selecting menu comes out when DOWN (
) button in CTPT monitoring screen panel or
UP (
) button in operation monitoring screen panel is touched as shown in figure 13. This screen
panel is composed of A Code, B Code, C Code, H Code, and E Code.
Figure 13 Function selecting menu screen panel
(1)
A code: Set general controls for operation
(2)
B code: Set protective functions.
(3)
C code: Set controls for digital I/O contacts and values of gain and offset.
(4)
H code: Set controls for motor.
(5)
E code: Set controls for breakdown history, initialization of the system, and current time.
4.3.9 Group A Screen 1
‘Group A Screen 1’ screen panel comes out when ‘A code’ button is touched in function selecting
menu. This panel specifies the ways of getting frequency command and operational command
while running. And base frequency and maximum frequency for V/F control are set in this panel.
Figure 14 Group A screen 1