![background image](http://html.mh-extra.com/html/hyundai/n5000/n5000_instruction-manual_2196570008.webp)
5
Chapter2. Installation and Wiring
Chapter2. Installation and Wiring
Chapter2. Installation and Wiring
Chapter2. Installation and Wiring
N5000 INSTRUCTION MANUAL
N5000 INSTRUCTION MANUAL
N5000 INSTRUCTION MANUAL
N5000 INSTRUCTION MANUAL
Notice
• When cleaning the equipment room, please use a vacuum cleaner lest dust will be stirred up.
• Do not apply silicon wax to the floor in the equipment room. It will have a negative effect on the
electric contact.
• After an external cable (grounding wire, main circuit cable and control wire) is led into the panel
completely seal the cable lead-in hole with putty.
If the cable lead-in hole is left unfilled, fresh air will enter the equipment, preventing the above
installation environment from being secured, which may cause serious damage to the equipment.
2.2 Wiring
••••
Power must be turned off when working on wiring to avoid electric shock.
••••
Wiring work shall be carried out by expert electrician.
•
Implement wiring after checking that the power supply is off. It might incur electric shock
and fire.
•
Check the polarity and the numbers on the terminal and connect them correctly.
2.2.1 terminal description
(1) Power terminals
Terminal block
Terminal block
Terminal block
Terminal block
Terminal name
Terminal name
Terminal name
Terminal name
Description
Description
Description
Description
R, S, T
Main power input
U, V, W
Inverter output
X01
R1, S1, T1
3 phases AC 440(220)V control power input
X02
P01, N01
Control power input (DC110V)
(2) Control signal terminals
Terminal block
Terminal block
Terminal block
Terminal block
Terminal
Terminal
Terminal
Terminal name
name
name
name
Description
Description
Description
Description
X11
5
∼
6 / 7
∼
8
Analog input(4
∼
20mA)
XB
20
∼
27, 29
∼
36
28, 37 : Common
Digital output (Dry contact)
X11
11
∼
12
13
∼
14
15
∼
16
Analog output (4
∼
20mA)
WARNING