![background image](http://html.mh-extra.com/html/hyundai/n5000/n5000_instruction-manual_2196570007.webp)
4
Chapter2. Installation and Wiring
Chapter2. Installation and Wiring
Chapter2. Installation and Wiring
Chapter2. Installation and Wiring
N5000 INSTRUCTION MANUAL
N5000 INSTRUCTION MANUAL
N5000 INSTRUCTION MANUAL
N5000 INSTRUCTION MANUAL
Chapter 2 Installation and Wiring
2.1 Precaution
Please observe the environmental guidelines below.
No.
No.
No.
No.
IIIItem
tem
tem
tem
D
D
D
Description
escription
escription
escription
1
Ambient temperature
Temperature range shall be between 0
℃
and +40
℃
.
The daily mean temperature shall be between 5
℃
and 35
℃
2
Relative humidity
Shall be under 50% at the maximum temperature of 40
℃
.
Even at low temperature, it shall not exceed 85%.
There shall be no condensation due to temperature changes.
3
Altitude
Shall be below 1000m above sea level.
4
Atmospheric pressure
Shall be within the range of 860 - 1060hPa.
5
Vibration
The vibration frequency at an installation site shall be below
10Hz or above 20Hz.
If it is below 10Hz, the acceleration of vibration shall be below
0.3G.
If the frequency is between 20Hz and 50Hz, the acceleration
shall be below 0.3G.
If the frequency is between is 50Hz and 100Hz, the full
amplitude shall be below
0.1mm.
6
Air quality of the room
The air conditions in the room where the equipment is
installed should be kept in
the normal air dust level, and especially be free of iron and
organic particles such
as silicon.
Corrosive factors
Density or quantity
Hydrogen sulfide (H
2
S)
0.001 PPM or less
Sulfur dioxide (SO
2
)
0.05 PPM or less
Chloride gas (Cl
2
)
0.1 PPM or less
Ammonia gas (NH
3
)
0.1 PPM or less
Nitrogen dioxide (NO
2
)
0.02 PPM or less
Nitrogen oxide (NOx)
0.02 PPM or less
Ozone (O
3
)
0.002 PPM or less
7
Corrosive
gas
Hydrochloric acid mist (HCl
1
)
0.1 mg/m
3
or less