66
Chapter
Chapter
Chapter
Chapter4
4
4
4.
.
.
. Inverter Operation
Inverter Operation
Inverter Operation
Inverter Operation
N5000 INSTRUCTION MAN
N5000 INSTRUCTION MAN
N5000 INSTRUCTION MAN
N5000 INSTRUCTION MANUAL
UAL
UAL
UAL
4.3.24 Group E Screen 1
When the entered password was correct on the password input screen panel, ‘Group E Screen 1’
screen panel would come out as shown in figure 31. This screen panel also comes out when
DOWN button (
) in ‘Group E Screen 4’ or UP (
) button in ‘Group E Screen 2’ is touched. Time
of
fault
occurence,
fault
code,
commanding/output
frequency,
and
accumulated
operating/powered-on time at the time of inverter fault are shown in this screen panel.
Figure 30 Group E screen 1
(1)
Fault index: shows the ordered number of faults. Maximally 64 fault data can be stored. Fault
index increases when the DOWN button (
) at the right side is touched. (Old data) Fault
index decreases when the UP button (
) at the right side is touched. (New data)
(2)
Fault code: shows the reason of inverter fault (refer to
[note]
).
(3)
Fault time: shows the time when the inverter fault has occured.
(4)
Commanding frequency: shows the commanding frequency when the inverter fault has
occured.
(5)
Output frequency: shows the output frequency when the inverter fault has occurred.
(6)
Output voltage: shows the output voltage when the inverter fault has occurred.
(7)
Output current: shows the output voltage when the inverter fault has occurred.
(8)
Accumulated Operating time: shows the accumulated operating time from starting of inverter
operation to the occurrence of inverter fault.
(9)
Accumulated powered-on time: shows the accumulated powered-on time from starting of
power-on to the occurrence of inverter fault.
Run
Run
Run
Run
time
time
time
time
On
On
On
On
time
time
time
time