39
Chapter
Chapter
Chapter
Chapter4
4
4
4.
.
.
. Inverter Operation
Inverter Operation
Inverter Operation
Inverter Operation
N5000 INSTRUCTION MAN
N5000 INSTRUCTION MAN
N5000 INSTRUCTION MAN
N5000 INSTRUCTION MANUAL
UAL
UAL
UAL
When touching any button in the screen panel, 10KEY screen comes out for inputting values.
(1) Controller selection: Select a controller between operator and remote controller.
0: [Displays ‘Operator’] takes controlling values through operator. (called as LOCAL
mode)(Refer to operation controlling screen panel).
1: [Displays ‘TM’] takes controlling values through external analog input or contacts.
(Called as ROMOTE mode)(Refer to group A screen 2).
(2) Base frequency: set base frequency. Usually rated frequency of the motor is selected for the
base frequency.
[Reference2]
.
(3) Maximum frequency: set maximum frequency of inverter output voltage.
[Reference2]
.
(4) Acceleration pattern: set pattern for acceleration in accordance with the loaded value.
0: [displays ‘Line’] acceleration pattern is linear as shown in figure 15.
1: [displays ‘S’] acceleration pattern is S-shaped curve as shown in figure 15.
2: [displays ‘U’] acceleration pattern is a U-shaped curve as shown in figure 15.
3: [displays ‘RU’] acceleration pattern is a Rerversed U-shaped curve as shown in figure 15.
[Reference 2]
☞
Base frequency: the frequency that generates maximum output voltage. Usually rated frequency
of the motor is set as base frequency.
☞
Maximum frequency: maximum frequency that can operate motor. Constant voltage is generated
beyond base frequency as shown below.
Relationship between base frequency and maximum frequency
