Hyundai 2012 Genesis Owner'S Manual Download Page 209

Page: 209 / 429

Features of your vehicle

130

✽

NOTICE FOR USING THE
iPod

DEVICE

• Some iPod

models might not sup-

port the communication protocol
and the files will not be played.
Supported iPod

models:

- iPod

Mini

- iPod

4th(Photo) ~ 6th(Classic)

generation
- iPod

Nano 1st~4th generation

- iPod

Touch 1st~2nd generation

• The order of search or playback of

songs in the iPod

can be different

from the order searched in the
audio system.

• If the iPod

disabled due to its own

malfunction, reset the iPod

(Reset: Refer to iPod

manual)

• An iPod

may not operate normally

on low battery.

• Some iPod

devices, such as the

iPhone, can be connected through the

Bluetooth

Wireless Technology inter-

face. The device must have audio

Bluetooth

Wireless Technology capa-

bility (such as for stereo headphone

Bluetooth

Wireless Technology). The

device can play, but it will not be con-
trolled by the audio system.

CAUTION IN USING THE

iPod

DEVICE

• The HYUNDAI iPod

Power Cable

is needed in order to operate
iPod

with the audio buttons on

the audio system. The USB cable
provided by Apple may cause
malfunction and should not be
used for HYUNDAI vehicles.

❋

The HYUNDAI iPod

Power Cable

may be purchased through your
HYUNDAI Dealership.

• When connecting iPod

with the

iPod

Power Cable, insert the con-

nector to the multimedia socket
completely. If not inserted com-
pletely, communications between
iPod

and audio may be interrupted.

• When adjusting the sound effects of

the iPod

and the audio system, the

sound effects of both devices will
overlap and might reduce or distort
the quality of the sound.

• Deactivate (turn off) the equalizer

function of an iPod

when adjust-

ing the audio system’s volume,
and turn off the equalizer of the
audio system when using the
equalizer of an iPod

(Continued)

(Continued)
• When the iPod

cable is connected,

the system can be switched to AUX
mode even without iPod

device

and may cause noise. Disconnect
the iPod

cable when you are not

using the iPod

device.

• When not using iPod

with car

audio, detach the iPod

cable from

iPod

Otherwise,

iPod

may

remain in accessory mode, and
may not work properly.

• When connecting the iPod

, use

the USB/AUX terminals.

• When disconnecting the iPod

disconnect both the USB/AUX ter-
minal.

• The iPod

exclusive cable must be

connected to both the USB/AUX
terminals for iPod

charging and

operations to be supported.

Detachable USB/AUX

All-in-one USB/AUX

Summary of Contents for 2012 Genesis














































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Genesis

Reviews:

Related manuals for 2012 Genesis

Brands by name

Popular brands

Hyundai 2012 Genesis, Owner'S Manual

Search results

Summary of Contents for 2012 Genesis

Reviews:

Related manuals for 2012 Genesis

Brands by name

Popular brands