Hyundai 2012 Genesis Owner'S Manual Download Page 94 | Manualshive

Page: 94 / 429

background image

4 15

Features of your vehicle

Do not arm the system until all pas-
sengers have left the vehicle. If the
system is armed while a passenger(s)
remains in the vehicle, the alarm may
be activated when the remaining pas-
senger(s) leave the vehicle. If any
door (or trunk) or engine hood is
opened within 30 seconds after the
system enters the armed stage, the
system is disarmed to prevent an
unnecessary alarm.

D030200ABH-EU

Theft-alarm stage

The alarm will be activated if any of the
following occurs while the system is
armed.
• A door is opened without using the

transmitter (or smart key).

• The trunk is opened without using the

transmitter (or smart key).

• The engine hood is opened.
The horn will sound and the hazard
warning lights will blink continuously for
approximately 30 seconds, and the alarm
will repeat once more unless the system
is disarmed. To turn off the system,
unlock the doors with the ignition key or
transmitter.

D020106ABH

Opening the trunk with the alarm
armed (if equipped)

When the alarm is armed, the alarm will
not sound if the trunk lid is opened with
the transmitter (or the smart key).
Once the trunk is opened and then
closed, the trunk will be locked automati-
cally and the system will be armed again.
Also, if any of the doors or hood is
opened while the trunk lid open and the
alarm armed, the alarm will sound.

D030400ABH-EE

Disarmed stage

The system will be disarmed when the
doors are unlocked with the transmitter
(or smart key).
After depressing the unlock button, the
hazard warning lights will blink and the
chime will sound twice to indicate that the
system is disarmed.
After depressing the unlock button, if any
door (or trunk) is not opened within 30
seconds, the system will be rearmed.

✽

✽

NOTICE

• Avoid trying to start the engine while

the alarm is activated. The vehicle
starter motor is disabled during the
theft-alarm stage.
If the system is not disarmed with the
transmitter, insert the key into the
ignition switch, turn the ignition
switch to the ON position and wait for
30 seconds. Then the system will be
disarmed. (for Canada)

• If you lose your keys, consult your

authorized HYUNDAI dealer.

CAUTION

Do not change, alter or adjust the
theft-alarm system because it could
cause the theft-alarm system to
malfunction. The system should
only be serviced by an authorized
HYUNDAI dealer.
Malfunctions caused by improper
alterations, adjustments or modifi-
cations to the theft-alarm system
are not covered by your vehicle
manufacturer warranty.

«
...
92
93
94
95
96
...
»

Summary of Contents for 2012 Genesis














































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Genesis

Brand: Harbor Freight Tools Pages: 4

Brand: kaarta Pages: 29

Brand: Yakima Pages: 8

Brand: Front Runner Pages: 5

Brand: AccuAir Pages: 40

Brand: Peak Pages: 10

VIEWLINE 52 MM - MOUNTING 11-09

Brand: VDO Pages: 4

Brand: Hella Pages: 21

Brand: Subaru Pages: 32

Brand: J. Strong Pages: 2

Brand: HAKR Pages: 9

Brand: Blaupunkt Pages: 6

Outlander Plug-in hybrid

Brand: Mitsubishi Pages: 28

1995 Roadmaster

Brand: Buick Pages: 340

Sebring Convertible

Brand: Chrysler Pages: 454

Brand: Buick Pages: 20

2014 All vehicles

Brand: Jeep Pages: 44

Brand: Havis Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands