Hyundai 2012 Genesis Owner'S Manual Download Page 364

Page: 364 / 429

Maintenance

Type A

1. Raise the wiper arm.

2. Open the cover of the blade. Press the

clip behind the wiper arm and remove
the blade assembly downward.

3. Install the new blade assembly in the

reverse order of removal.

4. Return the wiper arm on the wind-

shield.

5. Turn the ignition switch to the ON posi-

tion.

6. Move the wiper switch to any position

and then to the OFF position.

OHM078059

OHM078060

CAUTION

Do not allow the wiper arm to fall
against the windshield, since it may
chip or crack the windshield.

OHG070043

Summary of Contents for 2012 Genesis














































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Genesis

Reviews:

Related manuals for 2012 Genesis

Brands by name

Popular brands

Hyundai 2012 Genesis, Owner'S Manual

Search results

Summary of Contents for 2012 Genesis

Reviews:

Related manuals for 2012 Genesis

Brands by name

Popular brands