Hyundai 2012 Genesis Owner'S Manual Download Page 386

Page: 386 / 429

Maintenance

G210200AEN

Engine compartment fuse
replacement

1. Turn the ignition switch and all other

switches off.

2. Remove the fuse panel cover by

pressing the tab and pulling up.

3. Check the removed fuse; replace it if it

is blown. To remove or insert the fuse,
use the fuse puller in the front passen-
ger’s side panel.

4. Push in a new fuse of the same rating,

and make sure it fits tightly in the clips.
If it fits loosely, consult an authorized
HYUNDAI dealer.

G210201ABH

Main fuse

If the main fuse is blown, it must be
removed as follows:
1. Remove the fuse panel cover on the

right side in the engine compartment.

2. Remove the nuts shown in the picture

above.

3. Replace the fuse with a new one of the

same rating.

4. Reinstall in the reverse order of

removal.

✽

NOTICE

If the main fuse is blown, consult an
authorized HYUNDAI dealer.

CAUTION

After checking the fuse panel in the
engine compartment,

securely

install the fuse panel cover. If not,
electrical failures may occur from
water contact.

OBH078025

OBH071023

OBH071024

Summary of Contents for 2012 Genesis














































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Genesis

Reviews:

Related manuals for 2012 Genesis

Brands by name

Popular brands

Hyundai 2012 Genesis, Owner'S Manual

Search results

Summary of Contents for 2012 Genesis

Reviews:

Related manuals for 2012 Genesis

Brands by name

Popular brands