Hyundai 2012 Genesis Owner'S Manual Download Page 324

Page: 324 / 429

6 15

What to do in an emergency

4. Remove the wheel lug nut wrench,

jack, jack handle, and spare tire
from the vehicle.

5. Block both the front and rear of the

wheel that is diagonally opposite
the jack position.

6. Insert the jack handle into the

groove of the wheel cap and pry
gently to remove the wheel cap (If
equipped).

7. Loosen the wheel lug nuts coun-

terclockwise one turn each in
sequence of number, but do not
remove any nut until the tire has
been raised off the ground.

OBH068009

OBH062024

OBH061010

WARNING

- Changing a tire

• To prevent vehicle movement

while changing a tire, always
set the parking brake fully,
and always block the wheel
diagonally opposite the wheel
being changed.

• It is recommended that all

passengers exit the vehicle
before being lifted by the jack.

Summary of Contents for 2012 Genesis














































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Genesis

Reviews:

Related manuals for 2012 Genesis

Brands by name

Popular brands

Hyundai 2012 Genesis, Owner'S Manual

Search results

Summary of Contents for 2012 Genesis

Reviews:

Related manuals for 2012 Genesis

Brands by name

Popular brands