manualshive.com logo in svg

Hyundai 2012 Genesis, Owner'S Manual, Page: 263 / 429

Share
Download
Hyundai 2012 Genesis Owner'S Manual Download Page 263

Driving your vehicle

24

5

E070706BBH

EPB emergency release

If the EPB does not release properly, fol-
low these steps:
1. Shift the shift lever into P (Park).
2. Block the wheels.
3. Open the trunk and remove the cover.
4. Remove the emergency release han-

dle from the tool case.

5. Remove the emergency release cable

cover.

6. Install the emergency release handle

into the threaded end of the emergency
release cable by turning it clockwise.

7. Pull up the handle until sounds a "took".

The EPB warning light blinks.

8. After using the EPB emergency

release, a warning message will come
on. You should operate the EPB switch
for the vehicle to return to its normal
condition. If the vehicle does not return
to normal condition, take your vehicle
to an authorized HYUNDAI dealer and
have the system checked.

OBH058058

OBH052058N

OBH042341N

Type 

I

Type 

II

WARNING

Do not operate the parking brake
while the vehicle is moving except
in an emergency situation. It could
damage the brake system and lead
to an accident.

Summary of Contents for 2012 Genesis














































































































































































































































































































































































































































Reviews:

No comments