Hyundai 2012 Genesis Owner'S Manual Download Page 331

Page: 331 / 429

What to do in an emergency

When towing your vehicle in an emer-
gency without wheel dollies :
1. Set the ignition switch in the ACC posi-

tion.

2. Place the shift lever in N (Neutral).
3. Release the parking brake.

F080200ABH

Removable towing hook
(if equipped)

1. Open the trunk, and remove the tow-

ing hook from the tool case.

2. Remove the hole cover by pressing the

lower part of the cover on the front or
rear bumper.

OBH068016

OBH069027

CAUTION

• Do not tow the vehicle with the

rear wheels on the ground as this
may cause damage to the vehicle.

• Do not tow with sling-type equip-

ment. Use wheel lift or flatbed
equipment.

CAUTION

Failure to place the transmission
shift lever in N (Neutral) may cause
internal damage to the transmis-
sion.

OBH068017

OBH068018

Front

Rear

Summary of Contents for 2012 Genesis














































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Genesis

Reviews:

Related manuals for 2012 Genesis

Brands by name

Popular brands

Hyundai 2012 Genesis, Owner'S Manual

Search results

Summary of Contents for 2012 Genesis

Reviews:

Related manuals for 2012 Genesis

Brands by name

Popular brands