manualshive.com logo in svg

Hyundai 2012 Genesis, Owner'S Manual

The Hyundai 2012 Genesis Owner's Manual is an essential guide for every Genesis owner. This comprehensive manual provides detailed instructions and information on maintenance, operation, and troubleshooting. Download this manual for free from manualshive.com to ensure you have the necessary resources to maximize your Hyundai Genesis experience.

Share
Download
background image

WARNING

Always fully depress the brake
pedal before and while shifting out
of the P (Park) position into anoth-
er position to avoid inadvertent
motion of the vehicle which could
injure persons in or around the car.

Driving your vehicle

14

5

Sports mode

Whether the vehicle is stationary or in
motion, sports mode is selected by push-
ing the shift lever from the D (Drive) posi-
tion into the manual gate. To return to  D
(Drive) range operation, push the shift
lever back into the main gate.

In sports mode, moving the shift lever
backwards and forwards will allow you to
make gearshifts rapidly.
Up (+)

: Push the lever forward once to

shift up one gear.

Down (-) : Pull the lever backwards once

to shift down one gear.

✽

✽

NOTICE

• In sports mode, the driver must exe-

cute upshifts in accordance with road
conditions, taking care to keep the
engine speed below the red zone.

• In sports mode, only the 8 forward

gears can be selected. To reverse or
park the vehicle, move the shift lever
to the R (Reverse) or P (Park) position
as required.

• In sports mode, downshifts are made

automatically when the vehicle slows
down. When the vehicle stops, 1st gear
is automatically selected.

• In sports mode, when the engine rpm

approaches the red zone the transmis-
sion will upshift automatically.

• If the driver moves the lever to +(up)

or -(down) position, the transmission
may not make the requested gear
change if the next gear is outside of
the allowable engine rpm range.

• When driving on a slippery road,

push the shift lever forward into the
+(up) position. This causes the trans-
mission to shift into the 2nd (or 3rd)
gear which is better for smooth driv-
ing on a slippery road. Push the shift
lever to the -(down) side to shift back
to the 1st gear.

E060102BBH

Shift lock system 

For your safety, the automatic transmis-
sion has a shift lock system which pre-
vents shifting the transmission from P
(Park) or N (Neutral) into R (Reverse)
unless the brake pedal is depressed.
To shift the transmission from P (Park) or
N (Neutral) into R (Reverse):
1. Depress and hold the brake pedal.
2. Start the engine or turn the ignition

switch to the ON position.

3. Move the shift lever.
If the brake pedal is repeatedly
depressed and released with the shift
lever in the P (Park) position, a chattering
noise near the shift lever may be heard.
This is a normal condition.

OBH059006

+ (UP)

- (DOWN)

Sports mode

Summary of Contents for 2012 Genesis














































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Genesis

Samsung HF1000 User Manual preview
HF1000
Brand: Samsung Pages: 133
GARO ENTITY PRO Installation preview
ENTITY PRO
Brand: GARO Pages: 2
Suzuki Movano Owner'S Manual preview
Movano
Brand: Suzuki Pages: 353
Torklift F2012 Installation Instructions Manual preview
F2012
Brand: Torklift Pages: 16
Safe Fleet RVS-218627 Instruction Manual preview
RVS-218627
Brand: Safe Fleet Pages: 38
Mazda 2007 MazdaSpeed6 Specification preview
2007 MazdaSpeed6
Brand: Mazda Pages: 12
Saleen 10-8002-C11670C Manual preview
10-8002-C11670C
Brand: Saleen Pages: 17
walser 30968 User Instructions preview
30968
Brand: walser Pages: 24
Whispbar K607W Fitting Instructions Manual preview
K607W
Brand: Whispbar Pages: 14
Ranger design 1525-NS Installation Manual preview
1525-NS
Brand: Ranger design Pages: 22
National Cycle Quantum hardcoated N30216 Assembly Instructions And Owner'S Manual preview
Quantum hardcoated N30216
Brand: National Cycle Pages: 3
Quadratec 12057.0261 Installation Manual preview
12057.0261
Brand: Quadratec Pages: 12
TATA Motors Tata Indigo Diesel Owner'S Manual & Service Book preview
Tata Indigo Diesel
Brand: TATA Motors Pages: 190
Safe Fleet Prime Design HBR-E-FT33B Assembly Instructions Manual preview
Prime Design HBR-E-FT33B
Brand: Safe Fleet Pages: 12
Omix-Ada 11704.05 Owner'S Manual preview
11704.05
Brand: Omix-Ada Pages: 6
Kia CADENZA 2017 Features & Functions Manual preview
CADENZA 2017
Brand: Kia Pages: 58
RAM Truck 2014 Owner'S Manual preview
Truck 2014
Brand: RAM Pages: 330
Ratio Power box Manual preview
Power box
Brand: Ratio Pages: 12

Brands by name

Popular brands

Load more brands