manualshive.com logo in svg

Hyundai 2012 Genesis, Owner'S Manual

The Hyundai 2012 Genesis Owner's Manual is an essential guide for every Genesis owner. This comprehensive manual provides detailed instructions and information on maintenance, operation, and troubleshooting. Download this manual for free from manualshive.com to ensure you have the necessary resources to maximize your Hyundai Genesis experience.

Share
Download
background image

4 59

Features of your vehicle

Electronic brake force distri-
bution (EBD) system warning
light

If these two warning lights
illuminate at the same time
while driving, your vehicle
may have a malfunction with
the ABS and EBD system.
In this case, your ABS and regular brake
system may not work normally. Have the
vehicle checked by an authorized
HYUNDAI dealer as soon as possible.

✽

✽

NOTICE

If the ABS warning light or EBD warn-
ing light is on and stays on, the
speedometer

or

odometer/tripmeter

may not work. In this case, have your
vehicle checked by an authorized
HYUNDAI dealer as soon as possible.

D150304CBH-EU

Seat belt warning 

As a reminder to the driver, the seat belt
warning light will blink for approximately
6 seconds each time you turn the ignition
switch ON, regardless of belt fastening.
The warning light will blink again for
approximately 6 seconds when starting
the engine.
If the driver's seat belt is not fastened
when the ignition switch is turned on, the
seat belt warning light and chime will oper-
ate for approximately 6 seconds. But if it is
fastened within the 6 seconds, the warning
light will blink for the 6 seconds and the
warning chime will turn off immediately.
If the driver's seat belt is disconnected
after the ignition switch is turned to the
ON position, the seat belt warning light
will turn on for approximately 6 seconds.
But if it is fastened within the 6 seconds,
the warning light will turn off immediately.
If the driver's seat belt is not fastened
when the vehicle speed exceeds 6 mph
(10 km/h), the seat belt warning light and
chime will operate for approximately 11
times with a pattern of 6 seconds on and
24 seconds off until the belt is fastened
or the vehicle speed decreases below 3
mph (5 km/h).

D150305AUN

Turn signal indicator

The blinking green arrows on the instru-
ment panel show the direction indicated
by the turn signals. If the arrow comes on
but does not blink, blinks more rapidly
than normal, or does not illuminate at all,
a malfunction in the turn signal system is
indicated. Your dealer should be consult-
ed for repairs.

D150306AUN

High beam indicator 

This indicator illuminates when the head-
lights are on and in the high beam posi-
tion or when the turn signal lever is pulled
into the Flash-to-Pass position.

D150331ABH

Tail light indicator 

This indicator illuminates when the tail
lights are on.

WARNING

If the both ABS and brake warning
lights are on and stay on, your vehi-
cle’s brake system will not work nor-
mally during sudden braking. In this
case, avoid high speed driving and
abrupt braking. Have your vehicle
checked by an authorized HYUNDAI
dealer as soon as possible.

Summary of Contents for 2012 Genesis














































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Genesis

OEM Tools 22505 Operating Instructions And Parts Manual preview
22505
Brand: OEM Tools Pages: 4
Fabbri BICI OK 2 Quick Start Manual preview
BICI OK 2
Brand: Fabbri Pages: 4
Brodit ProClip 853660 Manual preview
ProClip 853660
Brand: Brodit Pages: 2
Power Fist 8985988 Manual preview
8985988
Brand: Power Fist Pages: 12
EAL EUFAB 16491 Operating Instructions Manual preview
EUFAB 16491
Brand: EAL Pages: 7
BGS technic 40108 Manual preview
40108
Brand: BGS technic Pages: 5
Oldsmobile 1999 88 Owner'S Manual preview
1999 88
Brand: Oldsmobile Pages: 344
ABL eMH3 Installation Manual preview
eMH3
Brand: ABL Pages: 66
Rola LRSA2 Pack Contents & Fitting Instructions preview
LRSA2
Brand: Rola Pages: 3
Globalsat MR-350P Installation Manual preview
MR-350P
Brand: Globalsat Pages: 2
BMW E39/2 Installation Instructions Manual preview
E39/2
Brand: BMW Pages: 21
Mini COOPER Owner'S Manual preview
COOPER
Brand: Mini Pages: 20
Right Weigh 221-SK Installation Manual preview
221-SK
Brand: Right Weigh Pages: 16
Metra Electronics 99-7477 Installation Instructions preview
99-7477
Brand: Metra Electronics Pages: 2
Yutrax TX107 Operator'S Manual preview
TX107
Brand: Yutrax Pages: 8
Mercedes-Benz Sprinter 2003 Manual preview
Sprinter 2003
Brand: Mercedes-Benz Pages: 296
BrandMotion FLTW-7511 Installation Manual preview
FLTW-7511
Brand: BrandMotion Pages: 6
Saab 32 025 907 Installation Instructions Manual preview
32 025 907
Brand: Saab Pages: 37

Brands by name

Popular brands

Load more brands