Hypertherm HyPrecision 15, Operator'S Manual

Page: 178 / 194

178 HyPrecision15/30/50 Operator Manual 808240
9 – Installation
Inst
al
lati
on
Hypertherm products are designed and manufactured with a commitment to continuous quality control and safety.
Contact a Hypertherm Technical Service Associate for information and support regarding the installation, operation,
maintenance, and repair of this equipment.
Buyer obligations
The buyer is responsible for these obligations:
 Cooperate with Hypertherm and the Hypertherm original equipment manufacturer (OEM) regarding the installation of
the equipment.
 Research and comply with all local codes, including requirements for wastewater disposal.

Install high-pressure tubing.
 Install water-treatment equipment before the pump is installed.

Make sure that all utilities are available during installation. The site must have sufficient electrical power, air, water,
and sewer drain access.
 Make all connections to the pump.

Hypertherm does not always supply the pump with hydraulic fluid in the tank. It is the buyer's responsibility to fill the
tank with hydraulic fluid.
This waterjet system might exceed national and local codes for permitted noise levels.
When this pump is running, the noise level is 80 dB(A) to 85 dB(A). Noise level is related to factors such as
water flow rate, pipe layout, and the acoustical characteristics of the building.
Prolonged exposure to noise can cause permanent hearing loss. Wear approved ear protection and control
exposure time when operating or working near this equipment.
High-pressure water can cause severe cuts or lacerations, abrasions, and punctures. Wear approved hand
protection when operating or working near this equipment.
Some materials can produce airborne contaminants or suspended particles when cut. Wear approved
respiratory protection.
Examine and clean the pump regularly. Make repairs immediately.
Keep the work area clean and free of fluid spills.