Chapter I
– The BAX® System X5 Instrument
BAX® System X5 User Guide
9
If you are processing fewer than 32 samples in the BAX® System X5 instrument, it is important to load samples in a
symmetric pattern to ensure the instrument is balanced and to prevent potential damage to the instrument lid. We
recommend loading samples first in Row A and Row D, starting at the corners. Once the two outer rows are full, then
use Row B and Row C to load samples in a symmetric pattern.
Note: BAX® System Q7 PCR tubes cannot be used with the BAX® System X5 instrument.
Safety Precautions
Instrument Safety
WARNING - PHYSICAL INJURY HAZARD
. Use this instrument as specified by Hygiena to avoid personal
injury or damage to the instrument
DANGER - ELECTRICAL HAZARD
. Use properly configured and approved line cords for the voltage supply
in your facility. Use only the power cables and Ethernet connector supplied with the system package.
Caution!
Any break in the electrical ground wire, whether inside or outside the instrument, or disconnection of
the electrical ground connection, could create a hazardous condition.
Caution!
Do not under any circumstances attempt to modify or deliberately override the safety features of this
system.
The BAX® System X5 instrument is for indoor use only.
Do not place the instrument in direct sunlight or close to radiators or heating devices.
Do not place the BAX® System X5 instrument next to any source of vibration or electromagnetic interference, or
instrumentation that has high inductance (e.g., refrigerators, centrifuges, or mixers).
Do not place anything on top of the instrument.
Do not to place anything under the instrument, such as sheets of paper, since these could block the air inlet.
