FluidAqua Mobil - FAM 10/15-P
Storing the FAM/Taking it out of Operation
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 73 / 80
BEWA FAM10-15-P 3193324b en-us 2011-01-19.doc
2011-01-19
Storing the FAM/Taking it out of Operation
Drain the unit completely, including all of its components, the same way as is done
before putting it into storage.
Pull out the power plug and securely fasten the hoses and power cord to the unit.
Store the unit in a clean, dry (non-condensing) space.
Observe the storage temperature range of: –20
C … 60
C
Disposing of the FAM
When decommissioning and/or disposing of the unit, observe all local guidelines and
regulations pertaining to occupational safety and environmental protection. This
applies in particular to the oil in the unit, components covered with oil and electronic
components.
After disassembling the unit and separating the various materials, reuse them or
dispose of them properly in accordance with local regulations.
Type label
The type plate is located on the front panel. Copy the data from the type label into
the following, in order to have at hand when required.
