FluidAqua Mobil - FAM 10/15-P
FAM Description
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 20 / 80
BEWA FAM10-15-P 3193324b en-us 2011-01-19.doc
2011-01-19
Performance
The FAM is able to dewater the fluids described in the "Suitable fluids" section to a
water content of less than 1000 PPM.
Typical dewatering rates:
FAM - 10
~ 0.8 l/h
FAM10/15
~ 1.0 l/h
The dewatering speed is dependent on:
Dewatering rate
Water content
Fluid temperature
Detergent additives
Flow rate of the FAM
As an approximate guideline, the dimensioning of the FluidAqua Mobil can be
defined in accordance with the tank volume.
Tank volume in liters
Size
< 2,000
FAM - 10
2,000 – 7,000
FAM10/15
Note that free water, e.g. on the bottom of the tank, can have an influence on the
entire water content in the system. Drain off free water before taking a sample.
For the determination of the water content, the sample should be extracted from the
system to be cleaned at a test connection during operation if at all possible.
