HYDAC International FluidAqua Mobil FAM 10, Operating And Maintenance Instructions Manual

Page: 58 / 80

FluidAqua Mobil - FAM 10/15-P Performing maintenance
HYDAC FILTER SYSTEMS GMBH en(us) Page 58 / 80
BEWA FAM10-15-P 3193324b en-us 2011-01-19.doc 2011-01-19
See page 24 hours / daily 500 hours / monthly 3000 hours / every six months 6000 hours / annually
Fluid filter (OLF 5)
Change the filter element
(If this has not been required earlier)
65 X
Condensate separator
Check the fill level on the condensate
separator
63 X
Change the filter element on the
condensate separator
62 X
Electrics
Check cable conduits for damage,
replacing as necessary
- X
Measure the engine power
consumption of all engines and
compare the values with the type label
- X
Checking the AquaSensor - X
Perform electrical safety inspection in
accordance with DIN VDE 0702 and/or
corresponding national regulation.
- X
Measure power consumption of the
heater and compare values with type
label (applies only to versions with
integrated heater)
- X
Function test
Check and clean the level sensor in
the vacuum column.
X
Float switch oil pan - malfunction
message and E-STOP function
X
1)
The first oil change must take place after 100 operating hours.
Completely replace all of the hoses after 5 years.
The pictures and illustrations in the descriptions are examples. They do not
represent all of the different product variants.