210
MAINTENANCE
Basic machine
HBR204-MU-6-eng.doc
OPERATION AND MAINTENANCE INSTRUCTION MANUAL
THIS DOCUMENT IS THE PROPERTY OF HÜETTE BOHRTECHNIK GMBH - TOTAL OR PARTIAL REPRODUCTION IS PROHIBITED
B3
ENGINE OIL LEVEL CHECK
The control must be made with when the engine has been shut
down for at least 15 minutes.
1.
Open the hatches (A).
WARNING!
Danger of burns!
Wait for the surfaces in the engine compartment to cool off
before accessing the engine compartment.
2.
Check the level of oil with the dipstick (A). The oil level
must be between the minimum and maximum level
notches.
If the level is below the minimum, fill up via the filling
hole (B).
If the oil level is over the maximum, drain excess oil from
the drain hole on the oil pan.
Too much or too little oil may damage the engine or reduce its
performance. Do not start the engine if the oil is not within the
indicated limits.
B4
HYDRAULIC OIL LEVEL CHECK
The control must be made with when the engine has been
shut down for at least 15 minutes.
The level must be visible in the upper part of the level indicator
(A).
Fill as necessary.
WARNING!
Danger of burns!
The hydraulic oil tank and the oil it contains may reach high temperatures and
pressures.
NOTE: Minimum hydraulic oil level is indicated on the control panel (1TTCV). This anomaly
causes engine shutdown.
6.7.3
6.4.1
6.7.2
