D.12
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
H006134
A
H11465
2
1
MIN
MAX
SETTINGS AND ADJUSTMENTS
Workshop Manual Ed. 03-2012
Rear brake fluid level check
Level (A) must be between the MIN and MAX notches visible on the master
cylinder reservoir.
Engine oil level check
Oil level depends on oil temperature. The higher the temperature,
the higher the oil level inside oil sump. Should oil level be checked
with the engine cold or after short runs, wrong readings may be
taken, with consequent wrong topping-up.
- Start vehicle as described in the relevant section, let it run for approx. 3 to
5 minutes so as to warm engine up.
- Turn engine off.
-
With the vehicle in a flat ground and in vertical position
, check oil level
through the inspection sight glass (1) positioned on engine right casing.
Make sure the level is in between the MIN and MAX notches.
- To top up, remove filler cap (2).
