E.38
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
H02491
1
H02492
2
3
H02493
2
4
5
6
8
9
H06373
7a
7
A
GENERAL PROCEDURES
Workshop Manual Ed. 03-2012
Engine removal
- Remove lower tank, throttle body, chain, and exhaust system as described
in the relevant paragraphs.
- Loosen screw (1) positioned onto pump body, and drain off cooling sys
-
tem.
- Loosen clamps (2), and remove engine cooling hoses (3), (4) and (5).
- Loosen screw (6) (with an 8 mm wrench), and detach ground cable (8).
To loosen the nut (7) retaining the "Motor positive" cable (9), it is
necessary to use two 8 mm wrenches: one to hold the lock nut (7a)
and the other to loose the nut (7) retaining the cable.
This operation is required to prevent stud bolt removal.
