I.36
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
6
2
7
2
8
2
9
2
0
3
2
3
5
3
Workshop Manual Ed. 03-2012
FRONT SUSPENSION
• In order to be able to act on the pumping element you will need to remove the
foot buffer components: hold the foot buffer nut ( 26 ) using a 18 mm spanner
and unscrew the push rod ( 29 ) with a 17 mm hexagonal spanner.
• Remove the upper nut ( 26 ) and the foot buffer ( 28 ).
• Using a small screwdriver prize the stop ring ( 27 ) off the rod.
• Remove the stop ring ( 27 ) and the push rod ( 29 ) off the rod.
• Push the rod ( 32 ) towards the inside area of the body ( 30 ) to be able to slide
the complete pumping element out, starting from the bottom.
The pumping element can be completely overhauled and adjusted.
Paragraph 4. 8 shows how to overhaul and modify the pumping ele-
ment setting.
• Verify the segment ( 35 ) wear.
Paragraph 4.10 shows how to re- assemble the pumping element
and the bottom.
