Y.9
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
2
H06409
TC - TE - TXC
3
H06410
TC - TE - TXC
H06412
SMR
3
1
1
H06411
SMR
2
Workshop Manual Ed. 03-2012
CHASSIS AND WHEELS
Fit the wheel between the fork legs so as to set the brake disc into the calliper.
Fit the wheel axle (2) from the R.H. side, after greasing it and push it fully
home against the L.H. fork leg; during this operation, the wheel should be
turned.
Tighten the screw (3) on the fork L.H. side but DO NOT lock it. Lock: the screws
(1) on the R.H. leg (10.4 Nm, 1.05 Kgm, 7.7 ft/lb), the screw (3) on the L.H. side
(51.45 Nm, 5.25 Kgm, 38 ft/lb), the screws (1) on the L.H. leg ( 10.4 Nm, 1.05
Kgm, 7.7 ft-lb).
After reassembly, pull the brake control lever until the pads are
against the brake disc.
