J.8
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
10
11
9
9
11
H006191
5
8
9
7
9
6
2
8
8
9
8
9
4
1
H006194
H006193
2
3
1
Workshop Manual Ed. 03-2012
REAR SUSPENSION
- Check bearings (11), seals and bushings for wear.
- Upon reassembly, tighten nut (8) to 80 Nm - 8 Kgm - 59.00 ft-lb and pins (9)
to 100 Nm - 10 Kgm - 73.76 ft-lb.
Grease the inner race of the bearings before refitting them.
Linkage disassembly
To remove drag link (1) and drop link (2), proceed as follows:
- Using a 14 mm wrench, remove the screw (3) retaining shock absorber drop
link (2).
- Using a 17 mm wrench, remove nut (4) and remove pin (5) on the other side.
- Using a 14 mm wrench, remove nut (6) and screw (7) on the other side.
- Ensure that needle roller bearings (8) and bushes (9) are not worn and replace
them, if necessary.
Upon reassembly, grease both bearings and bushes and tighten nut (6)
to 73 Nm - 7.3 Kgm - 53.84 ft-lb and nut (4) to 80 Nm - 8.0 Kgm - 59.00
ft-lb.
