Humminbird 581i DI Combo Operation Manual Download Page 87

Page: 87 / 140

Navigation X-Press™ Menu

Waypoint [Name]

(Most recently-created waypoint)

Settings: Edit, Delete, Go To, Target, Grid

Waypoint [Name]

allows you to view the waypoints submenu for the most

recently created waypoint. You must have pressed the MARK key at least once
since you last powered up the Fishfinder for this menu option to appear.

NOTE:

See

Introduction to Navigation

and the Humminbird® Waypoint Management

Guide for more information.

The Waypoint Submenu contains the following menu options:

Edit

opens the Edit Waypoint dialog box so that you can edit the selected

waypoint. See

Introduction to Navigation

and the Humminbird® Waypoint

Management Guide for more information.

Delete

allows you to delete the waypoint.

Go To

starts navigation to the waypoint.

Target

applies a target to the waypoint.

Grid

applies a trolling grid to the waypoint.

Summary of Contents for 581i DI Combo













































































































































Search results

Summary of Contents for 581i DI Combo

Reviews:

Related manuals for 581i DI Combo

Brands by name

Popular brands

Humminbird 581i DI Combo, Operation Manual

Search results

Summary of Contents for 581i DI Combo

Reviews:

Related manuals for 581i DI Combo

Brands by name

Popular brands