Humminbird 581i DI Combo Operation Manual Download Page 2 | Manualshive

Page: 2 / 140

background image

Thank You!

Thank you for choosing Humminbird®, the #1 name in fishfinders.
Humminbird® has built its reputation by designing and manufacturing
top-quality, thoroughly reliable marine equipment. Your Humminbird® is
designed for trouble-free use in even the harshest marine environment. In
the unlikely event that your Humminbird® does require repairs, we offer an
exclusive Service Policy - free of charge during the first year after purchase,
and available at a reasonable rate after the one-year period. For complete
details, see the separate warranty card included with your unit. We
encourage you to read this operations manual carefully in order to get full
benefit from all the features and applications of your Humminbird® product.

To contact our Customer Resource Center, call

1-800-633-1468

or visit our

Web site at

humminbird.com

.

WARNING!

This device should not be used as a navigational aid to prevent collision,

grounding, boat damage, or personal injury. When the boat is moving, water depth may
change too quickly to allow time for you to react. Always operate the boat at very slow
speeds if you suspect shallow water or submerged objects.

WARNING!

The electronic chart in your Humminbird® unit is an aid to navigation

designed to facilitate the use of authorized government charts, not to replace them. Only
official government charts and notices to mariners contain all of the current information
needed for the safety of navigation, and the captain is responsible for their prudent use.

WARNING!

Disassembly and repair of this electronic unit should only be performed by

authorized service personnel. Any modification of the serial number or attempt to repair
the original equipment or accessories by unauthorized individuals will void the warranty.

WARNING!

This product contains chemicals known to the State of California to cause

cancer and/or reproductive harm.

WARNING!

Do not travel at high speed with the unit cover installed. Remove the unit

cover before traveling at speeds above 20 mph.

WARNING!

Humminbird® is not responsible for the loss of data files (waypoints, routes,

tracks, groups, recordings, etc.) that may occur due to direct or indirect damage to the
unit’s hardware or software. It is important to back up your control head’s data files
periodically. Data files should also be saved to your PC before restoring the unit’s
defaults or updating the software. See the following sections of your Humminbird®
manual: SD Card Slot. Also, contact our Customer Resource Center with any questions.

«
1
2
3
4
...
»

Summary of Contents for 581i DI Combo













































































































































Reviews:

No comments

Related manuals for 581i DI Combo

Brand: Chinavision Pages: 4

Brand: Lowrance Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands