91
Digital Depth Source
(Advanced, optional-purchase transducers only)
Settings: Auto, 2D Element; Default = Auto
Digital Depth Source
specifies the beams that will be used to provide the
depth for the digital depth readouts (see
Views
and
Setup Menu Tab: Select
Readouts
for more information). It is important to set this menu option based
on the transducer that is connected to the control head, as follows:
• If a
Down Imaging™ transducer
is connected to the control head,
select Auto. Depending on the depth, Auto will automatically choose
the 2D conical beams or the Down Imaging™ beams to display depth in
the digital readout window. Auto is the default setting.
• If an
accessory transducer
is connected to the control head, select 2D
Element. For example, if you connect an ice transducer to your Down
Imaging™ unit, change the digital depth source to 2D Element in order
to display depth in the digital readout window. The 2D Element setting
should not be used with a Down Imaging™ transducer.
NOTE:
Visit our Web site at
humminbird.com
to determine which accessory
transducers are compatible with your Humminbird® Fishing System, or Contact our
Customer Resource Center.
NOTE:
When Digital Depth Source is set to 2D Element, the DI Only setting will be
removed from the DI Pings menu. When DI Pings is set to DI Only, the 2D Element setting
will be removed from the Digital Depth Source menu. See
DI Pings
for more information.
DI Pings
(Advanced, Down Imaging™ View and
Chart/Down Combo View only)
Settings: All Beams, DI Only; Default = All Beams
DI Pings
allows you to select which beams will be used to display returns in
the Down Imaging™ view.
Select
All Beams
to display returns from both the 2D sonar beams and the
Down Imaging™ beams.
Select
DI Only
to display returns from the Down Imaging™ beams only.
Selecting DI Only provides faster screen updates.
Sonar Menu Tab
