Humminbird 581i DI Combo Operation Manual Download Page 85

Page: 85 / 140

Navigation X-Press™ Menu

Cursor to Waypoint

(Chart or Combo View only)

Settings: Follow screen instructions to activate.

Cursor to Waypoint

allows you to quickly move the cursor to any saved

waypoint so that you can locate it or edit it. This X-Press™ Menu option only
appears if you have saved waypoints.

Chart Declutter

Settings: Press the RIGHT Cursor key to activate.

Chart Declutter

removes all chart layers except for land outlines, waypoints,

routes, and tracks. The chart will stay decluttered for 10 seconds, and then it
will refresh to its previous display settings. To refresh the view faster than 10
seconds, press the +/– Zoom keys.

NOTE:

See

Navigation Menu Tab: Chart Detail Level

for more information.

Save Current Track

Settings: Follow screen instructions to activate.

Save Current Track

allows you to save the current track on the display. After

the current track is saved, a new current track is started. Save Current Track
appears on the Navigation X-Press™ Menu after navigation is stopped.

Clear Current Track

Settings: Follow screen instructions to activate.

Clear Current Track

allows you to clear the current track on the display and

start a new track at the present position.

Save Current Route

(only when Navigating)

Settings: Follow screen instructions to activate.

Save Current Route

allows you to save the current route being displayed. This

menu option will only appear when you are currently navigating a route.

Summary of Contents for 581i DI Combo













































































































































Search results

Summary of Contents for 581i DI Combo

Reviews:

Related manuals for 581i DI Combo

Brands by name

Popular brands

Humminbird 581i DI Combo, Operation Manual

Search results

Summary of Contents for 581i DI Combo

Reviews:

Related manuals for 581i DI Combo

Brands by name

Popular brands