Humminbird 581i DI Combo Operation Manual Download Page 11

Page: 11 / 140

Power On

Follow the instructions below to power on your Humminbird® control head.

1. Press the

POWER/LIGHT key.

2. When the Title screen is displayed, press the MENU key to access the

Start-Up Options Menu.

3. If a functioning transducer is connected, Normal operation will be

selected automatically, and your Fishfinder can be used on the water.
See

Start-Up Options Menu

for more information.

•

If a transducer is not connected and you wait too long to select a
Start-Up Option, the system will default to whichever menu is
already highlighted.

• You can also select

Simulator

to learn how to use your control

head and save settings in advance for later use.

Quick Setup:

If this is the first time the unit has been powered on (after

installation or after restoring defaults), the Quick Setup dialog box will
display on the screen. Use the 4-WAY Cursor Control key to set the
Language, Water Type, and Max Depth. Press the EXIT key to close the
dialog box.

NOTE:

The Quick Setup settings can be changed at any time. See each menu option

The Menu System

for details.

Title Screen

Power On

Summary of Contents for 581i DI Combo













































































































































Search results

Summary of Contents for 581i DI Combo

Reviews:

Related manuals for 581i DI Combo

Brands by name

Popular brands

Humminbird 581i DI Combo, Operation Manual

Search results

Summary of Contents for 581i DI Combo

Reviews:

Related manuals for 581i DI Combo

Brands by name

Popular brands