Humminbird 581i DI Combo Operation Manual Download Page 63

Page: 63 / 140

SD Memory Card Slot

To export selected navigation items:

Use the following instructions to select and export specific waypoints, routes,
tracks, and groups to an installed, unlocked SD Card.

1. Insert an unlocked SD card into the SD card slot.

Open the Waypoint Management Dialog Box:

Press the MENU key

twice. Press the RIGHT Cursor key until the Navigation tab is selected.
Select Waypoints, Routes, Tracks. Press the RIGHT Cursor key.

3. From a selected group directory in the Waypoint Management dialog

box, select Options > Select Multiple and... > Export.

Select Items:

Press the UP or DOWN Cursor keys to scroll through the

waypoints, routes, tracks, and groups. Press the RIGHT Cursor key to
select an item. Repeat as needed.

Confirm Export:

When you are finished selecting items, press the EXIT

key to select Export Selected. Press the RIGHT Cursor key and follow
the on-screen instructions to confirm or cancel the export.

NOTE:

If an SD memory card is not installed, an error message will be displayed. Insert

the SD memory card and try again.

NOTE:

The SD memory cards and USB Memory Card Reader require separate

purchases. The USB Memory Card Reader accessory can be used with your personal
computer to view and organize your exported navigation data. To purchase this
accessory, visit our Web site at

humminbird.com

or contact our Customer Resource

Center at

1-800-633-1468

Summary of Contents for 581i DI Combo













































































































































Search results

Summary of Contents for 581i DI Combo

Reviews:

Related manuals for 581i DI Combo

Brands by name

Popular brands

Humminbird 581i DI Combo, Operation Manual

Search results

Summary of Contents for 581i DI Combo

Reviews:

Related manuals for 581i DI Combo

Brands by name

Popular brands