Shutting down
Chapter 8
OPERATION MANUAL
V1.2.0en/12.05.15//14.06
Liability for errors and misprints excluded.
Unistat® T300 Series
87
8.5
Shipping
Temperature control unit transported in a horizontal position
DAMAGE TO THE COMPRESSOR
Only transport the temperature control unit in an upright position.
Temperature control unit transported incorrectly
PROPERTY DAMAGE
Do not transport by truck on the castors or feet.
Comply all requirements in this section to avoid damage to the temperature control unit.
Transport using the lugs, if fitted, on the top of the temperature control unit. Do not transport the
temperature control unit alone and without aids.
▪
Always use the original packaging for transport.
▪
Always transport the temperature control unit upright on a pallet!
▪
Protect attachments from damage during transport!
▪
During transport, place the temperature control unit on squared timber to protect the cas-
tors/feet.
▪
Secure with tensioning belts/lashing straps rated for the weight concerned.
▪
Additionally secure (depending on model) with plastic film, cardboard and straps.
8.6
Disposal
Improper disposal
ENVIRONMENTAL DAMAGE
Spilled/leaked thermal fluid must be discarded immediately and correctly.
To avoid environmental damage, have “disused” temperature control units dispoved of exclu-
sively by approved waste management companies (e.g. refrigeration and air conditioning com-
panies).
Pallet with squared
timber for free-
standing units
