Introduction
OPERATION MANUAL
Chapter 1
Unistat® T300 Series
Liability for errors and misprints excluded.
V1.2.0en/12.05.15//14.06
14
1
Introduction
1.1
Details on the declaration of conformity
The equipment complies with the basic health and safety requirements of the European Directives
listed below:
▪
Machinery Directive 2006/42/EC
▪
Low Voltage Directive 2006/95/EC
▪
EMC Directive 2004/108/EC
1.2
Safety
1.2.1
Symbols used for Safety Instructions
Safety instructions are marked by the below combinations of pictograms and signal words. The
signal word describes the classification of the residual risk when disregarding the operation manual.
Denotes an immediate hazardous situation that will result in death or serious injuries.
Denotes a general hazardous situation that may result in death or serious injuries.
Denotes a hazardous situation that can result in injury.
Denotes a situation that can result in property material damage.
Denotes important notes and usable hints.
Notes in conjunction with Ex p cabinets.
The safety information in this operation manual is designed to protect the responsible body, opera-
tor and the equipment from damage. Safety information must always appear BEFORE instructions
and at the beginning of each chapter. You should be first informed about the residual risks due to
misuse before you begin an operation.
Safety information and
procedure
