Parameter
Description
Bit rate control
mode
This parameter is available only when you set Bit rate
type to Constant bit rate. The options are as follows:
– Frame rate priority: Ensure the smoothness of the
video image.
– Image quality priority: Ensure the quality of the
video image.
Frame rate
The frame rate is measured by the number of frames
displayed in a second.
A higher frame rate indicates clearer and smoother
images and higher bandwidth consumption.
Image quality
This parameter is available only when you set Encoding
protocol to H.264 or H.265 and Bit rate type to
Variable bit rate.
Better image quality requires higher bandwidth.
Therefore, select proper image quality based on the site
requirements.
I-frame interval
This parameter is available only when you set Encoding
protocol to H.264 or H.265.
An I frame is an intra-coded frame that represents a
fixed image independent of other picture types. Each
group of pictures (GOP) begins with this type of frame.
A smaller I-frame interval indicates better video quality
and higher bandwidth consumption.
Layered
encoding
This parameter is available only when you set Encoding
protocol to H.264 or H.265.
To enable layered encoding, select Layered encoding.
JPEG quality
This parameter is available only when you set Encoding
protocol to MJPEG.
A larger value indicates higher image quality.
----End
Follow-up Procedure
Commission other cameras by referring to this section.
6.4.2.3 Commissioning the IVS1800
6.4.2.3.1 Setting Parameters on the IVS1800 WebUI
Prerequisites
For details about the IVS1800 hardware description and installation, see the Quick
Start in the corresponding IVS1800 product documentation. For details about the
iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
6 Adding Devices
Issue 02 (2021-05-12)
Copyright © Huawei Technologies Co., Ltd.
174
