Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual Download Page 197

Page: 197 / 340

Parameter

Description

Example

User Name

Indicates the user name for

logging in to the VCN/IVS

client.

NOTE

● The NetEco needs to have

browse and query permissions,

please configure the video

system users with browse and

query permissions.

● It is recommended that the

new user name created using

the IVS be used to access the

camera. Before accessing the

camera, ensure that the initial

password of the user has been

changed and the user has

successfully logged in to the

IVS.

● It is recommended that the

number of IVS clients to which

the user can log in to a value

greater than 5. Otherwise,

when the user has logged in to

the IVS client, the user cannot

● The admin user cannot log in

to the NetEco to connect to

the VCN.

Huawei123

Indicates the password for

logging in to the VCN/IVS

client.
If the password does not

comply with the rules, please

change the password on device.

Change_Me

Step 7 Click Test after configuring parameters.

NO TE

● During the first test, the page turns blank. Wait 30s.
● If the test fails, a message indicating a connection failure is displayed.

Step 8 Click Save.

----End

6.4.2.5 Adding Cameras by Automatic Discovery on the NetEco

This section describes how to quickly add an online camera that is not in any

management domain to a management domain using the automatic discovery

function provided by the system.

iMaster NetEco

Device Installation and Commissioning Guide (Data

Center)

6 Adding Devices

Issue 02 (2021-05-12)

186

Summary of Contents for iMaster NetEco V600R021C10





















































































































































































































































































































































Search results

Summary of Contents for iMaster NetEco V600R021C10

Reviews:

Related manuals for iMaster NetEco V600R021C10

Brands by name

Popular brands

Huawei iMaster NetEco V600R021C10, Device Installation And Commissioning Manual

Search results

Summary of Contents for iMaster NetEco V600R021C10

Reviews:

Related manuals for iMaster NetEco V600R021C10

Brands by name

Popular brands