The environment monitoring device collects the environment monitoring information and
outputs the information to the device through the ALMI interface. If any exception occurs in the
working environment of the device, the device generates an alarm accordingly and reports the
alarm to the NMS for real-time monitoring and management. Users can run a command to
configure which channel (1 to 4 channels) and which object (temperature, voltage, current,
smoke, and cabinet door) to be monitored. The device then determines whether to report the
associated alarm to the NMS based on the configuration performed by users.
l
Auxiliary interface module
–
Provides 4-channel alarm input interfaces.
l
Control drive module
–
Detects the system status through the management and control bus.
–
Processes alarm signals, orderwire signals, and transparent data signals.
–
Supports hot swapping.
l
Power module
–
Inputs 2-channel -48 V/-60 V DC power.
–
Supplies 3.3 V or 1.2 V power.
Table 4-60
Description of the interfaces on the Auxiliary Flexible Interface Card with 4-Port
100Base-RJ45(FIC, Supporting 1588v2)
Interface
Type
Description
F1
RJ-45
Reserved
PHONE
RJ-45
Reserved
ALMO
RJ-45
Reserved
ALMI
RJ-45
Interface that inputs four
channels of alarm signals
FE0-FE3
RJ-45
Interfaces that input and
output FE electrical signals
shows the appearance of the Auxiliary Flexible Interface Card with 4-Port 100Base-
RJ45(FIC, Supporting 1588v2).
Figure 4-12
Appearance of the Auxiliary Flexible Interface Card with 4-Port 100Base-RJ45
(FIC, Supporting 1588v2)
HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description
4 Boards
Issue 03 (2014-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
126
