manualshive.com logo in svg

Huawei CX600-X1-M Series, Hardware Description

The Huawei CX600-X1-M Series Hardware Description Manual is available for free download at our website. This comprehensive manual provides detailed insights into the product, offering in-depth information on its hardware components and functionalities. Visit manualshive.com to access the manual and enhance your understanding of this outstanding Huawei product.

Share
Download
background image

Indicator/
Button

Description

ACT
indicator

If the indicator is steady green, the NPU is in the master state.
If the indicator is off, the NPU is in the slave state or fails to be registered.

OFL
button

This button indicates the removal of the NPU. Before removing the NPU, press
and hold the OFL button for 6s until the OFL indicator comes on. Then, you
can remove the NPU.

 

Specifications

Table 1-16

 lists the specifications of the NPU.

Table 1-16

 Specifications of the NPU

Item

Specification

Silkscreen of the board
name

NPU-50-E

Typical power
consumption

165 W

Heat dissipation

535.3 BTU/hour

Weight

2.6 kg ( 5.73 lb )

Dimensions (H x W x D)

20 mm x 194 mm x 226 mm (0.79 in. x 7.64 in. x 8.90 in.)

Earliest Software Version

V800R005C01

 

1.4.4 Introduction to the NPU-120

NOTE

NPU-120 must not be installed in an outdoor cabinet.

The NPU-120 has a 120-Gbit/s forwarding capability in each direction, and all subcards switch
data through the NPU-120.

You can install only one NPU-120 on the chassis of the CX600-X1-M4. The NPU-120 is
connected to the four PICs.

The NPU-120 consists of the following planes:

l

Control and management plane

Through the management channels between MPUs and NPUs, the MPUs can manage
NPUs and associated subcards, and transmit routing protocol data.

l

Data forwarding plane

HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description

1 CX600-X1-M4 Hardware Description

Issue 03 (2014-04-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

19

Summary of Contents for CX600-X1-M Series











































































































































































































































Reviews:

No comments

Related manuals for CX600-X1-M Series

ZETR 25 Installation Manual preview
25
Brand: ZETR Pages: 2
CallDirect CD Series At Command Manual preview
CD Series
Brand: CallDirect Pages: 33
Parker H Series Installation & Service Instructions Manual preview
H Series
Brand: Parker Pages: 344
IBM BladeCenter Management Module Installation And User Manual preview
BladeCenter Management Module
Brand: IBM Pages: 184
Lucent Technologies Cajun P118LX Installation Manual preview
Cajun P118LX
Brand: Lucent Technologies Pages: 20
XJTAG XJLink2-CFM User Manual preview
XJLink2-CFM
Brand: XJTAG Pages: 9
Xilinx Zynq-7000 Manual preview
Zynq-7000
Brand: Xilinx Pages: 8
Lantech IMR-3003 User Manual preview
IMR-3003
Brand: Lantech Pages: 40
BEC 7404 Series User Manual preview
7404 Series
Brand: BEC Pages: 159
ENERMAX LIQMAX III ELC-LMT120-ARGB User Manual preview
LIQMAX III ELC-LMT120-ARGB
Brand: ENERMAX Pages: 32
ICP Chapter C Quick Setup Manual preview
Chapter C
Brand: ICP Pages: 68
Ubiquiti UniFi AP PRO Quick Start Manual preview
UniFi AP PRO
Brand: Ubiquiti Pages: 20
Altera Cyclone IV GX Reference Manual preview
Cyclone IV GX
Brand: Altera Pages: 40
Milesight Pro UR32 Quick Start Manual preview
Pro UR32
Brand: Milesight Pages: 15
TRENDnet TE100S8P - Fast Ethernet Switch (Spanish) Quick Installation Manual preview
TE100S8P - Fast Ethernet Switch
Brand: TRENDnet Pages: 11
Intel CORE 2 DUO E4000 - 3-2008 Datasheet preview
CORE 2 DUO E4000 - 3-2008
Brand: Intel Pages: 122
Smacq Technologies PCI-1232 User Manual preview
PCI-1232
Brand: Smacq Technologies Pages: 22
Z3 Technology DM8168-MOD-35 Manual preview
DM8168-MOD-35
Brand: Z3 Technology Pages: 22

Brands by name

Popular brands

Load more brands