manualshive.com logo in svg

Huawei CX600-X1-M Series, Hardware Description

The Huawei CX600-X1-M Series Hardware Description Manual is available for free download at our website. This comprehensive manual provides detailed insights into the product, offering in-depth information on its hardware components and functionalities. Visit manualshive.com to access the manual and enhance your understanding of this outstanding Huawei product.

Share
Download
background image

Table 1-6

 Description of the indicators on the PSUs

Indicator Name

Description

OUT

When the indicator is steady green, the PSUs are working properly
and supply stable power.
When the indicator is steady red, the hardware of the PSUs fails or
the device is not supplied with power ranging from -48 V or -60 V or
the input voltage is lower or higher than the normal range.
When the indicator is off, the PSUs are switched off or the hardware
of the PSUs is faulty.

IN

When the indicator is steady green, the power input is normal.
When the indicator is off, the device is not supplied with power
ranging from -48 V or -60 V.

 

l

Notes on DC power monitoring:
The DC power monitoring channel can implement real-time monitoring on power supply.
In addition, the DC power monitoring channel allows you to query the manufacturing ID,
input voltage, and temperature of the PSUs in real time, and supports real-time reporting
of power supply alarms.

l

Notes on the configuration of DC power cables:
You do not need to connect protection ground cables to the PSUs, but the protection ground
cable for the chassis must be properly grounded. DC power cables include a -48 V power
cable and a return (RTN) ground cable. The required cable length depends on the distance
between the cabinet and the power distribution cabinet for the device. The DC power cables
need to be prepared according to the required lengths on site. For details about DC power
cables, see 

5.1.1 DC Power Cables

.

1.2.4 AC Power Supply System

Working principles of the ETP48120-F1 AC power supply system are as follows:

The ETP48120-F1 uses single-phase power input.

The ETP48120-F1 supplies power for AC-DC rectifiers using the system backplane.

The DC output of the AC-DC rectifiers is congregated by the bus and then divided to multiple
power-supplying channels.

The SMU01A monitoring module monitors the operating parameters of the ETP48120-F1 in
real time, analyzes the operating status, and reports alarms.

Figure 1-8

 shows the outline of an AC power supply system.

Figure 1-8

 Outline of an AC Power Supply System

HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description

1 CX600-X1-M4 Hardware Description

Issue 03 (2014-04-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

11

Summary of Contents for CX600-X1-M Series











































































































































































































































Reviews:

No comments

Related manuals for CX600-X1-M Series

Laird OL 4503 Specification And User Manual preview
OL 4503
Brand: Laird Pages: 36
Hawking CF100W Specifications preview
CF100W
Brand: Hawking Pages: 2
Lochinvar Armor 101 Series Instructions Manual preview
Armor 101 Series
Brand: Lochinvar Pages: 28
Lochinvar Armor 101 Series Service Manual preview
Armor 101 Series
Brand: Lochinvar Pages: 44
Falcon 4G COMBO User Manual preview
4G COMBO
Brand: Falcon Pages: 24
BSS Audio EC-4B Installation Manual preview
EC-4B
Brand: BSS Audio Pages: 20
Reeven NAIA Installation Manual preview
NAIA
Brand: Reeven Pages: 2
TRENDnet TW-200 Specifications preview
TW-200
Brand: TRENDnet Pages: 2
Paradyne Hotwire 6341 Installation Instructions Manual preview
Hotwire 6341
Brand: Paradyne Pages: 23
Draytek Vigor 2760 Series Quick Start Manual preview
Vigor 2760 Series
Brand: Draytek Pages: 54
Datasat DDR-16 AES67 Installation And Operating Manual preview
DDR-16 AES67
Brand: Datasat Pages: 24
Juniper EX2500 Quick Start preview
EX2500
Brand: Juniper Pages: 2
Pressalit Care Indivo RK1010 User And Maintenance Manual preview
Indivo RK1010
Brand: Pressalit Care Pages: 31
Delta Electronics LonWorks Communication Module LN-01 Instruction Sheet preview
LonWorks Communication Module LN-01
Brand: Delta Electronics Pages: 1
DFRobot FIT0677 Assembly Manual preview
FIT0677
Brand: DFRobot Pages: 30
Extron electronics Network Adapter AC AAP Specifications preview
Network Adapter AC AAP
Brand: Extron electronics Pages: 2
Ross ULTRIX-FM-NS-1RU Install Manual preview
ULTRIX-FM-NS-1RU
Brand: Ross Pages: 5
Asante IntraSwitch 5324MT Quick Installation Manual preview
IntraSwitch 5324MT
Brand: Asante Pages: 2

Brands by name

Popular brands

Load more brands