Huawei CX600-X1-M Series Hardware Description Download Page 35

Page: 35 / 234

Indicator/
Button

Description

RESET button

The button is used for resetting the MPU. Press the RESET button to
reset the MPU.

Table 1-24

Interfaces on the MPU

Interface
Name

Interface Type

Description

ETH interface
(10M/100M/
1000M Base-
TX auto-
sensing)

RJ45

One ETH interface, for system maintenance

Console
interface

RJ45

One console interface, used to connect to the
console for on-site configuration

AUX interface

NOTE

User login by
using AUX
interfaces is not
supported at
present.This
interface is used
for reservation
expansion.

RJ45

One AUX interface, used to connect to the
modem for remote maintenance through a
dial-up connection

TOD date
interface

RJ45

Input or output 1PPS and TOD clock signals
from one channel, and input and output DCLS
from one channel

CLK clock
interface

RJ45

One RJ45 interfaces. It is used to input one
channel or output one channel 2-Mbit/s clock
signals, or one channel 2-MHz clock signals.

RS485 interface RJ45

Used to connect to the monitoring interface
on the external AC power supply module

Attributes of the interfaces on the MPU

Table 1-25

lists the 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes.

HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description

1 CX600-X1-M4 Hardware Description

Issue 03 (2014-04-30)

Huawei Proprietary and Confidential

Summary of Contents for CX600-X1-M Series











































































































































































































































Search results

Summary of Contents for CX600-X1-M Series

Reviews:

Related manuals for CX600-X1-M Series

Brands by name

Popular brands

Huawei CX600-X1-M Series, Hardware Description

Search results

Summary of Contents for CX600-X1-M Series

Reviews:

Related manuals for CX600-X1-M Series

Brands by name

Popular brands