manualshive.com logo in svg

HPE XP P9000, User Manual, Page: 84 / 286

Share
Download
HPE XP P9000 User Manual Download Page 84

Installing software using a license key code

A Storage Administrator with modify permission can install license keys.

Procedure

1.

Click 

Settings

 > 

Environmental Setting

 > 

License Key

. The 

License Key

 window opens.

2.

Click 

 to change to Modify mode.

3.

Select 

Key Code

 in Mode.

4.

In 

Key Code

, enter the license key code.

5.

Click 

Install

. The 

Status

 column changes to 

Install

.

6.

Click 

Apply

. The status changes to 

Installed

.

If installation fails, an error message window appears. Display error details by selecting the failed option
and clicking 

Detail

.

Installing software using a license key file

You can install multiple software in a single procedure using a license key file. The license key files are
provided by Hewlett Packard Enterprise.

The required time for installing a license key file depends on the number of license keys included in the
file. A file with 30 license keys can take about 3 minutes to install. A file with 1,000 license keys can take
about 60 minutes to install.

Prerequisite

The license key file name can be up to 200 alphanumeric characters but cannot include the following
symbols: " \ ; : , * ? < > | / .

Procedure

1.

Click 

Settings

 > 

Environmental Setting

 > 

License Key

. The 

License Key

 window opens.

2.

Click 

 to change to Modify mode.

3.

From 

Mode

, click 

File

. The 

Browse

 button becomes available.

4.

Click 

Browse

 to display the dialog box, and select the license key file (the file extension is 

plk

) to be

used for installing options on the displayed window. The selected file name appears in the 

File Name

text box.

5.

Click 

Install

.

6.

Click 

Apply

. The status changes to 

Installed

.

7.

If installation fails or an error occurs during the installation, a message appears listing the failed
options. To display the error details in the dialog box, select the failed option, and then, click 

Detail

.

When the status is Installed (Disabled)

If you do not install the prerequisite software or set up shared memory before you install the license key
software, the software installs correctly but will be disabled after you install it. To enable the license key,

84

License keys

Summary of Contents for XP P9000































































































































































































































































































Reviews:

No comments