HPE XP P9000 User Manual Download Page 69

Page: 69 / 286

The field definitions in the test e-mail are listed in the following table:

Table 15: E-mail details for system failures notice

Item

Description

Date

Date and time when the e-mail was sent. This time stamp is set by the mail server.

E-mail address of the receiver.

From

E-mail address of the sender.

Reply-To

E-mail address to which replies from the receivers will be sent. Optional.

Subject

E-mail title. Cannot be changed.

Date

Date when a system failure occurred.

Time

Time when a system failure occurred.

Machine

Name and serial number of the storage system.

RefCode

Reference code. The same code as the one reported by SNMP traps.

Detail

Failure details. The same information as the one reported by SNMP traps.

See the

XP P9000 SNMP Agent User Guide

for reference codes and failure details.

Setting time periods

You can set the following Remote Web Console time periods:

• Polling period for monitoring who is changing information while others are viewing

• Time interval for monitoring disk controller and disk array unit status

• Time period that a user is logged out of the SVP because of a network error

• Time period when no changes are made that access the RMI server and the user is released from

Modify mode as a result

You can also specify whether to show or hide the

Alerts

tab.

Prerequisites

You must have the Storage Administrator (Initial Configuration) role to perform this task. See

Common

elements

Procedure

Start a Web browser, and enter the following URL to open the tool panel.

https://

IP-address-or-host-name-of-SVP

/cgi-bin/utility/toolpanel.cgi

Click

Control Panel

to open the Control Panel.

Configuring the Remote Web Console environment

Summary of Contents for XP P9000































































































































































































































































































Search results

Summary of Contents for XP P9000

Reviews:

HPE XP P9000, User Manual, Page: 69 / 286

Search results

Summary of Contents for XP P9000

Reviews: