manualshive.com logo in svg

HPE XP P9000, User Manual, Page: 233 / 286

Share
Download
HPE XP P9000 User Manual Download Page 233

Item

Description

External User Group
Mapping - Domain
Name

Specify a domain name of the LDAP server.

You can specify ASCII code characters, hyphens (-), and periods (.).If you
select 

Disable

 in External User Group Mapping, this item is disabled.

External User Group
Mapping - Base DN

Specify a base DN to search for users to authenticate.

Available characters: Alphanumeric characters (ASCII characters) and all
symbols.

• Hierarchical model: Specify a DN of hierarchy that includes all the targeted

users for searching.

• Flat model: Specify a DN of hierarchy that is one level up of the targeted

user for searching.

You can enter alphanumeric characters and all symbols. Note, however, that
when you enter symbols like the following, you need to use a backslash to
escape for each ; , < = > \ / "In some cases, you may need to use a
backslash and an ASCII character to escape.

• \ -> \5c (hexadecimal)

• / -> \2f (hexadecimal)

• "-> \22 (hexadecimal)

External User Group
Mapping - Search User's
DN

Search for a user by specifying a DNAvailable characters: Alphanumeric
characters (ASCII characters) and all symbols.If you specify

sAMAccountName

 in External User Group Mapping - User Name Attribute, or

if you select Enable in External User Group Mapping, this item must be
specified.

You can enter alphanumeric characters and all symbols. Note, however, that
when you enter symbols like the following, you need to use a backslash to
escape for each ; , < = > \ / "In some cases, you may need to use a
backslash and an ASCII character to escape.

• \ -> \5c (hexadecimal)

• / -> \2f (hexadecimal)

• "-> \22 (hexadecimal)

External User Group
Mapping - Password

Search for a user by specifying his password. Specify the same password
that is registered in the LDAP server.

You can specify ASCII code characters and the following symbols:! # $ % and
' ( ) * + - . = @ \ ^ _ |If you select Disable in External User Group Mapping,
this item is disabled.

Table Continued

Remote Web Console GUI reference (main window) 

233

Summary of Contents for XP P9000































































































































































































































































































Reviews:

No comments