HPE XP P9000 User Manual Download Page 100

Page: 100 / 286

Error code

Error message

Cause of error and action

Return
value

EW_COMERR

A certificate does not become
effective.

Please login again.

A certain period of time elapsed after a
login. Log in again.

131

EW_COMERR

Please login again.

A command was entered before
logging in. Log in and then enter the
command.

131

EW_ENFILE

No such folder.

Please refer to the help.

The specified folder to download to is
not found. See

Report Configuration

Tool command reference (raidinf
commands)

on page 138 and specify

the parameter again.

131

EW_ENOMEM

Memory allocate error.

Please other program
terminate.

Allocation of internal memory fails.
Close unnecessary programs or
reboot the server.

245

EW_INVOPA

Report name reserved.

Please check input -report
parameter.

You cannot use the report name
specified by the

-report

option.

Check the report name and specify a
new one.

131

EW_INVOPT

Invalid option.

Please refer to the help.

The hyphen (-) is not added to the
option parameter. See

Report

Configuration Tool command
reference (raidinf commands)

page 138 and specify a new
parameter.

131

EW_LNGARG

Argument too long.

Please refer to the help.

Either of the following causes is
possible.

• The length of a parameter of the

command exceeds 256 bytes.

• The length of all the parameters of

the command exceeds 1,021
bytes.

See

Report Configuration Tool

command reference (raidinf
commands)

on page 138 and specify

a new parameter.

131

EW_MAXAPP

Maximum application start.

Please check starting
application.

The maximum number of Savable that
you can connect simultaneously is
exceeded. Log out of unnecessary
SVPs and reconnect.

131

Table Continued

100

Viewing and managing the storage system

Summary of Contents for XP P9000































































































































































































































































































Search results

Summary of Contents for XP P9000

Reviews:

HPE XP P9000, User Manual, Page: 100 / 286

Search results

Summary of Contents for XP P9000

Reviews: