HPE XP P9000 User Manual Download Page 228

Page: 228 / 286

Item

Description

External Authentication

Displays the type of the authentication server.

• Disable: Does not use any authentication server. Users are authenticated

with user information registered in the SVP.

• LDAP: Users are authenticated with user information registered in the

LDAP server.

• RADIUS: Users are authenticated with user information registered in the

RADIUS server.

• Kerberos: Users are authenticated with user information registered in the

Kerberos server.

Setup Server table

Item

Description

Certificate File Name

Displays the certificate file.

DNS Lookup

Displays whether to search for the LDAP server using the information
registered in the SRV records in the DNS server.

• Enable: Performs the search using information registered in the SRV

records in the DNS server.

• Disable: Performs the search using the host name and the port number.

Authentication Protocol

Displays the LDAP protocol.

External User Group
Mapping

Displays whether to connect an authentication server to an authorization
server.

• Enable: Connects an authentication server to an authorization server.

• Disable: Does not connect an authentication server to an authorization

server.

Primary Host Name

Displays the host name of the LDAP server.

Primary Port Number

Displays the port number of the LDAP server.

Domain Name

Displays the domain name that the LDAP server manages.

User Name Attribute

Displays the attribute name to identify a user.

Base DN

Displays the base DN for searching for users to authenticate.

Search User's DN

Displays the DN of a user for searching.

Password

Displays asterisks (*) to mask the password of the user for searching.

Table Continued

228

Remote Web Console GUI reference (main window)

Summary of Contents for XP P9000































































































































































































































































































Search results

Summary of Contents for XP P9000

Reviews:

HPE XP P9000, User Manual, Page: 228 / 286

Search results

Summary of Contents for XP P9000

Reviews: