manualshive.com logo in svg

HPE XP P9000, User Manual, Page: 236 / 286

Share
Download
HPE XP P9000 User Manual Download Page 236

Item

Description

External Authentication

Displays the type of the authentication server.

• Disable: Does not use any authentication server. Users are authenticated

with user information registered in the SVP.

• LDAP: Users are authenticated with user information registered in the

LDAP server.

• RADIUS: Users are authenticated with user information registered in the

RADIUS server.

• Kerberos: Users are authenticated with user information registered in the

Kerberos server.

Setup Server table

Item

Description

Authentication Protocol

Displays the RADIUS protocol to use.

• PAP: Password authentication protocol that transmits plaintext user ID and

password.

• CHAP: Challenge-handshake authentication protocol that transmits

encrypted password.

Primary Host Name

Displays the name of the RADIUS server.

Secret

Displays asterisks (*) to mask the RADIUS secret key used for the PAP
authentication or the CHAP authentication.

NAS Address

Displays the identifier for the RADIUS server to find SVP.

Primary Port Number

Displays the port number of the RADIUS server.

Timeout

Displays the number of seconds before connection to the RADIUS server
times out.

Number of Retries

Displays the retry times when the connection to the RADIUS server fails.

Secondary Host Name

Displays the name of the secondary RADIUS server.

Secondary Port Number Displays the port number of the secondary RADIUS server.

External User Group
Mapping - Certificate
File Name

Displays the certificate file.

External User Group
Mapping - Authentication
Protocol

Displays the LDAP protocol to use.

Table Continued

236

Remote Web Console GUI reference (main window)

Summary of Contents for XP P9000































































































































































































































































































Reviews:

No comments